我们承担某项建筑工程抗震加固任务时,由于该工程楼层较高,外墙修补量大而分散,需要支搭外脚手架才能施工。但当时我们只有一名架子工,而且工期紧迫,不允许采用上述方法施工。在同志们共同努力下,制成了一台移动式电动简易吊篮(图1)。吊篮由电机、平板车、吊篮等几部分组成。电机安装在木制平板车端部,通过减速、滑轮等控制吊篮升降。 When we undertake the task of seismic strengthening of a certain construction project, due to the high level of the project and the large amount of external wall repairs, we need to use an external scaffold for construction. However, at the time we only had one shelf worker and the schedule was too tight to allow the above methods to be used. With the joint efforts of comrades, a mobile electric simple basket was made (Figure 1). The basket consists of motors, flatbeds, and baskets. The motor is mounted on the end of a wooden flatbed and the basket is controlled to move up and down by means of speed reduction, pulleys, and the like.