Rolling process plays an important role in the manufacture of Bi-based high temperature superconductor tapes, and the plastic flow regularities of the superconducting wires during deformation will directly affect the ultimate quality of the tapes. In order to investigate the effect of cross-sectional shapes before flat rolling on the performance and homogeneity of the tapes, some numerical models of Bi-2223/Ag wires with different cross-sectional shapes including circular, square, elliptical and racetrack cross-sections are constructed during the rolling process. By comparing the relative density, logarithmic strain ratio and length-width ratio on the filaments, it is revealed that Bi-2223/Ag wire with special-shaped cross-section can achieve better conductivity than the round wire, in particular, the racetrack cross-sectional wire has the second best performance among four wires. Based on material processability and experimental condition, tri-pass racetrack drawing technique is employed to optimize the process and obtain racetrack cross-sectional wire. The rolling process of Bi-2223/Ag wire with racetrack cross-section causes more intensive deformation of filaments in the center of the tape and achieves the filaments with larger length-width ratio. Also, the deformation distribution of filaments verifies the numerical results. Consequently, the racetrack drawing technique can be utilized for a reference during the mechanical processing and to increase the current transmission capacities of Bi-2223/Ag tapes. Rolling process plays an important role in the manufacture of Bi-based high temperature superconductor tapes, and the plastic flow regularities of the superconducting wires during deformation will directly directly affect the ultimate quality of the tapes. In order to investigate the effect of cross-sectional shapes before flat rolling on the performance and homogeneity of the tapes, some numerical models of Bi-2223 / Ag wires with different cross-sectional shapes including circular, square, elliptical and racetrack cross-sections are constructed during the rolling process. By comparing the relative density, logarithmic strain ratio and length-width ratio on the filaments, it is revealed that Bi-2223 / Ag wire with special-shaped cross-section can achieve better conductivity than the round wire, in particular, the racetrack cross-sectional wire has the second best performance among four wires. Based on material processability and experimental condition, tri-pass racetrack drawing technique is emplo yed to optimize the process and obtain racetrack cross-sectional wire. The rolling process of Bi-2223 / Ag wire with racetrack cross-section causes more intensive deformation of filaments in the center of the tape and achieves the filaments with larger length-width ratio Also, the deformation distribution of filaments verifies the numerical results. The racetrack drawing technique can be utilized for a reference during the mechanical processing and to increase the current transmission capacities of Bi-2223 / Ag tapes.