论文部分内容阅读
Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinforced polytetrafluoroethylenepolyphenylene sulfide(PTFE-PPS) composites in a sliding system. The tribological behaviors of the composites were evaluated under different normal loads(100–300 N) at a high linear velocity(2 m/s) using a block-on-ring tester. Addition of the nano-Al_2O_3 filler improved the antiwear performance of the PTFE-PPS composites, and the friction coefficient increased slightly. The lowest wear rate was obtained when the nano-Al_2O_3 content was 3%(volume fraction). Further, the results indicated a linear correlation between wear and the amount of energy dissipated, even though the wear mechanism changed with the nano-Al_2O_3 content, independent of the normal load applied.
Nanoparticles are increasingly being used to improve the friction and wear performance of polymers. In this study, we investigated the tribological behavior and energy dissipation characteristics of nano-Al_2O_3-reinforced polytetrafluoroethylenepolyphenylene sulfide (PTFE-PPS) composites in a sliding system. The tribological behaviors of the composites were evaluated under different normal loads (100-300 N) at a high linear velocity (2 m / s) using a block-on-ring tester. Addition of the nano-Al 2 O 3 filler improved the antiwear performance of the PTFE- The lowest wear rate was obtained when the nano-Al 2 O 3 content was 3% (volume fraction). Further, the results indicate a linear correlation between wear and the amount of energy dissipated, even though the wear mechanism changed with the nano-Al 2 O 3 content, independent of the normal load applied.