论文部分内容阅读
在自动线生产时,工序间设备与设备,设备与储料器间都用料道连接,料道本身也是个小型储料器。为了防止料满后造成事故,因此料道中料满后必须发出信号,停止继续进料。一部分料道结构是自高至低自行滚动型式,料满机构应放在高处。工件积满到高处时造成料满状态,而每一个低处之工件都来自高处,因此放在高处之料满机构对每一个工件来说,都有影响,都会因此发生信号,而其中大部分信号都不是真正的料满信号,而是暂时
In the production of automatic lines, the process equipment and equipment, the equipment and the stocker are connected with the channel, and the channel itself is also a small hopper. In order to prevent an accident after the material is full, a signal must be given after the material in the material channel is full to stop feeding. A part of the channel structure is self-rolling from high to low, and the full material should be placed high. When the workpiece is filled to a high position, the material is full, and each workpiece at a low position is from a high position. Therefore, the material filling mechanism at a high position has an influence on each workpiece, and signals are generated. Most of these signals are not truly full, but temporary