1.取长方形冰淇淋盒一只,在近底部两侧用小型电烙铁烫出四个装轮轴的小孔,在靠近盒口的中部侧面,用大头针刺出两个装车篷的小孔(如图一)。2.用旧挂历纸或其他较厚的彩色纸,以能盖住盒口一半为准,照图二样作图,并按图三四的方式粘折成车篷。3.用二支废圆珠笔芯作车轴,穿入近盒底两侧的轴孔中,并在每轴的两端各安装上一对135胶卷盒盖或 1. Take a rectangular ice cream box, on both sides of the bottom near the bottom with a small electric iron hot four holes in the wheel shaft, near the mouth of the middle of the box side, pierce the holes with two pins into the hood (such as Figure I). 2 with the old calendar paper or other thick color paper, to cover half of the box whichever is the standard, as shown in Figure two, and according to Figure 34 four ways to fold into the hood. 3. Use two discarded ballpoint pen hubs for the axles and insert them into the shaft bores on both sides of the bottom of the near box and attach a pair of 135 film cassette lids at each end of each shaft