论文部分内容阅读
改用9800PRO PCB W阔别一时的RADEON 9800SE改卡热潮,近日又再复临DIY市场。这次所用的是并无需要采用任何破坏保养条款的方法,如修改BIOS或硬件改装,反而只需要透过软件的安装,便可以令到9800SE中隐藏的4条流水线重见天日。事实上,未必所有的9800SE芯片都能够以这种方法,顺利开启额外的4条流水线。除了视乎显示芯片本身的质素外,厂方所选用的PCG亦会有所影响。这次天扬这款9800SE最大的特色,是改用了与RADEON 9800PRO同样的PCG,成功“改装”成9800PRO的机会自然较高。
Switch to 9800PRO PCB W apart from the RADEON 9800SE change card craze recently DIY market again. What we are using this time is that there is no need to use any method of undermining the maintenance terms, such as revising the BIOS or hardware modifications. Instead, only the 4 lines hidden in the 9800SE can be rediscovered with software installation. In fact, not all 9800SE chips are able to successfully open an additional four pipelines in this way. In addition to depending on the quality of the display chip itself, the PCG selected by the manufacturer will also be affected. This day the most distinctive feature of this 9800SE Tianyang is switched to the same PC with the RADEON 9800PRO, the chance of a successful “conversion” into a 9800PRO is naturally higher.