ZL系列装载机轮边减速器是由内齿圈、双联齿轮、太阳齿轮以及保持架、轮毂、半轴等组成(如图所示)。按说明书要求安装时,先将三组双联齿轮上的记号,对正在双联齿轮中心与太阳齿轮中心的连线上,根据说明记号可从双联齿轮内侧,亦有从双联齿轮外侧(记号采用铅字或油漆示意)插入太阳齿轮,再慢慢地转动轮毅,使三组双联齿轮小齿轮的齿都啮合在内齿圈内,而后拧紧螺丝, ZL series loader wheel reducer is composed of ring gear, double gear, sun gear, cage, hub and half shaft (as shown in the figure). When installing according to the instruction manual, the marks on the three pairs of double gears are firstly used on the connection line between the center of the double gear and the center of the sun gear, and the indication marks can be taken from the inner side of the double gear and also from the outer side of the double gear ( Indications are marked with lead or paint) Insert the sun gear, and then slowly turn the wheel Yi, so that the teeth of the three sets of double gear pinion gears are meshed in the ring gear, and then tighten the screws,